Device Support Summary For "Infineon(Siemens) SABC508-4E (SDIP)"

 
Generated by:BPWin V7.0.7 DeviceSupportUpdate.60 (11/3/2021)
 
Device Parameters

Manufacturer:Infineon(Siemens) (ID=C5h)
Part Number:SABC508-4E (SDIP) (ID=8h)
8-bit Bytes:32768
Vcc(program):5
Vpp(program):11.5
Secure:Yes
Set programming:Yes
Packages:DIP(64)
 
Note

IMPORTANT: Microcontroller with EPROM. You must select the appropriate security mode under DEVICE/OPTIONS to operate the secure command. Three security levels are available. MODE1: Disable further programming of the OTP memory. After secured, the device can only be verified using the OTP Verification Mode (see Siemens C508-4E specification). Device ID cannot be read from the device if the device has been secured. MODE2: Disable further programming and OTP verification. MODE3: Disable further programming, OTP verification and external execution. Please refer to Siemens(Infineon) specification for more information.
 
= Supported
 
= This is a replacement daughter card that requires a base socket module
 
Manual Production Programmers

Programmer Model:27102710M2610
Algorithm Code Revision:1.111.111.11
 
DIP Socket Modules (Sorted by Performance)
SM64SDM
SM64SDF
SM64SD
SM64SDA
 
Engineering Programmers

Programmer Model:1710161014101410/84
Algorithm Code Revision:1.111.111.111.11
 
DIP Socket Modules (Sorted by Performance)
SM64SDM
SM64SDF
SM64SD
SM64SDA
 
Copyright © 2021, BPM Microsystems
 

Last Updated: 01/14/2021