Device Support Summary For "Infineon(Siemens) SAF-XC161CS-32FF (ISP) (with adapter) TPA"

 
Generated by:BPWin V7.0.7 DeviceSupportUpdate.60 (11/3/2021)
 
Device Parameters

Manufacturer:Infineon(Siemens) (ID=41h)
Part Number:SAF-XC161CS-32FF (ISP) (with adapter) TPA (ID=96h)
16-bit words:131072
Vcc(program):2.5
Electrical Erase:Yes
Secure:Yes
Set programming:Yes
Packages:DIP(28) QFP(144)
 
Note

IMPORTANT: This device requires the use of a third party adapter. This is an ISP solution to be used with a WirePro test fixture. This algorithm is valid for devices starting with and including design step AA. Single-Chip Microcontroller with 256KByte Flash Memory. The 256KByte Flash Memory is mapped to Buffer addresses [00000h-3FFFFh]. Make sure that the default buffer value is set to 00h before loading data patterns. The read, write protection and passwords are described under Device Configure. It is programmed with the Device Secure command. To program the Device Configure options, you must select the appropriate options in that menu, and set "Secure after programming" to 'ENABLE'. Otherwise none of the options will be programmed with the Program command. If a device was previously programmed with a set of passwords with read protection enabled, the device can NOT be accessed any more. If a device was previously programmed with a set of passwords with only write protection enabled, a stand alone Erase operation must be executed first with correct passwords before attempting to reprogram it with a new set of passwords.
 
= Supported
 
= This is a replacement daughter card that requires a base socket module
 
Copyright © 2021, BPM Microsystems
 

Last Updated: 01/14/2021