Device Support Summary For "Cypress CYSHM35925I-M068LTI" |
|
|
Generated by: | BPWin V8.0.1 DeviceSupportUpdate.29 (3/27/2024) |
|
|
Device Parameters |
|
Manufacturer: | Cypress | Part Number: | CYSHM35925I-M068LTI | 8-bit Bytes: | 2422210562 | Memory Regions: | 0h-1 FFFFh; 9030 0000h-9030 0001h; 9040 0000h-9040 007Fh; 9050 0000h-9050 000Bh; 9060 0000h-9060 0001h | Vcc(program): | 3.30 | Electrical Erase: | Yes | Set programming: | Yes | Packages: | LAP(68) |
|
|
Note |
|
IMPORTANT:
Device Type: | ARM Cortex-M0. |
Device Size: | 128-KByte Flash. |
Algorithm Programming Method: | Serial wire debug(SWD). |
Memory Organization:
Memory Type |
Attributes(*) |
Included in default Range (Y/N) |
DUT Physical Byte Address(hex) (if this area is selected/Activated) |
BPWin Buffer Byte Address(hex) |
Main Flash Memory |
R/W/E |
Yes |
0000_0000 - 0001_FFFF |
0000_0000 - 0001_FFFF |
| | | | |
Check sum bytes |
R |
Yes |
9030_0000 - 9030_0001 |
9030_0000 - 9030_0001 |
flash protection |
R/W/E |
Yes |
9040_0000 - 9040_007F |
9040_0000 - 9040_007F |
Metadata-12bytes |
R |
Yes |
9050_0000 - 9050000B |
9050_0000 - 9050000B |
Chip Level Protection |
R/W/E |
Yes |
9060_0000 - 9060_0000 |
9060_0000 - 9060_0000 |
| | | | |
Default Algorithm Range |
--- |
--- |
0000_0000 - 9060_0001 |
0000_0000 - 9060_0001 |
* R:Read only, W: One time programmable (OTP), R/W: readable and one time programmable (OTP), R/W/E: readable and rewritable if not locked.
Any configurations listed under "Device-Specific" in the menu item Device-> Settings will be written to the DUT during "Program" operation regardless of memory range selection.
|
Special Device Considerations:
1. | Chip Level Protection 1 byte: [0x90600000]:
There are four states of Chip Level Protection into which the silicon can be moved:[ VIRGIN(0x00), OPEN(0x01), PROTECTED(0x02), KILL(0x04)].
- VIRGIN(0x00) - This mode is not for customer use. Can not program this value to device.
- OPEN(0x01) - In this mode, access to all the needed resources is enabled, including erase, program and verify flash.
- PROTECTED(0x02) - In this mode, access to Flash is disabled. Still allow to erase and reprogram flash.
- KILL(0x04) - The device can no longer be updated.
2. | The address [0x90600001] is ignored.
|
|
|
|
= Supported |
|
|
† = This is a replacement daughter card that requires a base socket module |
|
|
Automated Production Programmers |
|
|
|
Manual Production Programmers |
|
|
|
Copyright © 2024, BPM Microsystems |
|
|