Device Support Summary For "Cypress S70FS01GSDSBHI21"

 
Generated by:BPWin V8.0.1 DeviceSupportUpdate.29 (3/27/2024)
 
Device Parameters

Manufacturer:Cypress (ID=102h)
Part Number:S70FS01GSDSBHI21 (ID=214Dh)
8-bit Bytes:134218752
Memory Regions:0h-3 FFFFh; 4 0000h-3FB FFFFh; 3FC 0000h-3FF FFFFh; 400 0000h-403 FFFFh; 404 0000h-7FB FFFFh; 7FC 0000h-7FF FFFFh; 800 0010h-800 03FFh
Vcc(program):1.9
Electrical Erase:Yes
Set programming:Yes
Packages:BGA(24)
 
Note

IMPORTANT: 1 Gigabit MirrorBit Flash memory. Dual Die Stack of two FS512S die. This algorithm uses Standard SPI mode to Program and Verify/Read the device. The status register bits can be set under Device Config > Configure . The default Device Range is set to [0000000h-7FFFFFFh]. Please modify the range under Device Config > Range if any of the Security Registers need to be included. The OTP region is located in the range [8000000h-80003FFh]. The Factory Programmed 128-bit random number located at the beginning of the OTP region cannot be programmed, and data in this region will not be shown in the Buffer Editor. OTP Lock bits are located in the Buffer location [8000010h-8000013h] and Reserved bits are located at [8000014h-800001Fh].
 
= Supported
 
= This is a replacement daughter card that requires a base socket module
 
Automated Production Programmers

Programmer Model:39004900380048003000FS-MK23000FS
Algorithm Code Revision:1.21.21.21.21.21.2
 
BGA Socket Modules (Sorted by Performance)
FVE4ASMC24BGJ
FVE4ASM24BGB
 
Manual Production Programmers

Programmer Model:1900290028002800F-MK22800F
Algorithm Code Revision:1.21.21.21.21.2
 
BGA Socket Modules (Sorted by Performance)
FVE4ASMC24BGJ
FVE4ASM24BGB
 
Copyright © 2024, BPM Microsystems
 

Last Updated: 01/14/2021