Device Support Summary For "Cypress S25HL02GTDSBHI070 (custom01)"

 
Generated by:BPWin V8.0.1 DeviceSupportUpdate.29 (3/27/2024)
 
Device Parameters

Manufacturer:Cypress (ID=34h)
Part Number:S25HL02GTDSBHI070 (custom01) (ID=2A1Ch)
8-bit Bytes:268435456
Memory Regions:0h-FFF FFFFh
Vcc(program):3.6
Electrical Erase:Yes
Set programming:Yes
Packages:BGA(24)
 
Note

IMPORTANT:
Device Type: Serial Flash
Device Size: 2G-bit
Algorithm Programming Mode: SPI

Memory Organization:
Memory Type

Attributes(*)

Included in default
Range (Y/N)
DUT Physical Byte Address(hex)
(if this area is selected/Activated)
BPWin Buffer Byte Address(hex)
Semper Flash Memory Array R/W/E Yes 00000000 - 0FFFFFFF 00000000 - 0FFFFFFF
Default Algorithm Range --- --- 00000000 - 0FFFFFFF 00000000 - 0FFFFFFF
* R:Read only, W: One time programmable (OTP), R/W: readable and one time programmable (OTP), R/W/E: readable and rewritable if not locked. Any configurations listed under "Device-Specific" in the menu item Device-> Settings will be written to the DUT during "Program" operation regardless of memory range selection.

Special Device Considerations:
This algorithm uses 256Kb Uniform Sectors and not the default Hybrid Sectors. The status register bits can be set under Device Config > Configure . Erase must be selected if device to be programmed already has QE bit enabled. This algorithm does not support the Secure Silicon Array.
 
= Supported
 
= This is a replacement daughter card that requires a base socket module
 Automated Production Programmers
Programmer Model:39004900380048003000FS-MK23000FS
Algorithm Code Revision:1.61.61.61.61.61.6
 
BGA Socket Modules
FVE4ASMR24BGAT (discontinued)
 Manual Production Programmers
Programmer Model:1900290028002800F-MK22800F
Algorithm Code Revision:1.61.61.61.61.6
 
BGA Socket Modules
FVE4ASMR24BGAT (discontinued)
 
Copyright © 2024, BPM Microsystems
 
Last Updated: 01/14/2021