Device Support Summary For "Cypress S25HL02GTDSBHM050 (custom01)" |
|
|
Generated by: | BPWin V8.0.1 DeviceSupportUpdate.20 (3/12/2024) |
|
|
Device Parameters |
|
Manufacturer: | Cypress (ID=34h) | Part Number: | S25HL02GTDSBHM050 (custom01) (ID=2A1Ch) | 8-bit Bytes: | 268435456 | Memory Regions: | 0h-FFF FFFFh | Vcc(program): | 3.6 | Electrical Erase: | Yes | Set programming: | Yes | Packages: | BGA(24) |
|
|
Note |
|
IMPORTANT:
Device Type: | Serial Flash |
Device Size: | 2G-bit |
Algorithm Programming Mode: | SPI |
Memory Organization:
Memory Type |
Attributes(*) |
Included in default Range (Y/N) |
DUT Physical Byte Address(hex) (if this area is selected/Activated) |
BPWin Buffer Byte Address(hex) |
Semper Flash Memory Array |
R/W/E |
Yes |
00000000 - 0FFFFFFF |
00000000 - 0FFFFFFF |
| | | | |
Default Algorithm Range |
--- |
--- |
00000000 - 0FFFFFFF |
00000000 - 0FFFFFFF |
* R:Read only, W: One time programmable (OTP), R/W: readable and one time programmable (OTP), R/W/E: readable and rewritable if not locked.
Any configurations listed under "Device-Specific" in the menu item Device-> Settings will be written to the DUT during "Program" operation regardless of memory range selection.
|
Special Device Considerations:
This algorithm uses 256Kb Uniform Sectors and not the default Hybrid Sectors.
The status register bits can be set under Device Config > Configure .
Erase must be selected if device to be programmed already has QE bit enabled.
This algorithm does not support the Secure Silicon Array.
|
|
= Supported |
|
|
† = This is a replacement daughter card that requires a base socket module |
|
|
Automated Production Programmers |
|
|
|
Manual Production Programmers |
|
|
|
Copyright © 2024, BPM Microsystems |
|
|