Device Support Summary For "Infineon(Siemens) XMC1302-T038X0200AAXUMA1"

Generated by:BPWin V7.0.7 DeviceSupportUpdate.60 (11/3/2021)
Device Parameters

Part Number:XMC1302-T038X0200AAXUMA1
8-bit Bytes:208896
Memory Regions:1000h-3 2FFFh
Set programming:Yes

Device Type: ARM-based 32-bit MCU with 32 KByte Flash.
Device Size: 32K-Byte Flash
Algorithm Programming Method: ASC Bootstrap Loader mode(UART).

Memory Organization:
Memory Type


Included in default
Range (Y/N)
DUT Physical Byte Address(hex)
(if this area is selected/Activated)
BPWin Buffer Byte Address(hex)
Main Flash Memory R/W/E Yes 1000_1000 - 1003_2FFF 0000_1000 - 0003_2FFF
Default Algorithm Range --- --- 1000_1000 - 1003_2FFF 0000_1000 - 0003_2FFF
* R:Read only, W: One time programmable (OTP), R/W: readable and one time programmable (OTP), R/W/E: readable and rewritable if not locked. Any configurations listed under "Device-Specific" in the menu item Device-> Settings will be written to the DUT during "Program" operation regardless of memory range selection.

Special Device Considerations:
1. The Boot Mode Index values can be set under Device -> Settings. This value will not be verified by this algorithm.
The device may not be accessible (and hence stand-alone operations may fail) after programming, depending on the values written to the BMI.
2. Current algorithm does not support stand alone erase.
= Supported
= This is a replacement daughter card that requires a base socket module
 Automated Production Programmers
Programmer Model:3900490038004800
Algorithm Code Revision:
TSOP Socket Modules
 Manual Production Programmers
Programmer Model:190029002800
Algorithm Code Revision:
TSOP Socket Modules
Copyright © 2021, BPM Microsystems
Last Updated: 01/14/2021