Device Support Summary For "Infineon(Siemens) IR3564BMCC02TYP"

Generated by:BPWin V7.0.7 DeviceSupportUpdate.60 (11/3/2021)
Device Parameters

Part Number:IR3564BMCC02TYP
8-bit Bytes:146
Memory Regions:10h-91h

IMPORTANT: This algorithm does not use the standard 3 column data pattern. Dual Output Digital Multi-Phase Controller. The multiple-time progammable (MTP) memory at device addresses 10h-90h is mapped to buffer addresses 10h-90h. The configuration file must have configuration data only. Register Address and Configuration Mask are automatically added. There is a limit on maximum number of programming attempts. If this limit is exceeded programming operation wil fail. Please refer to device specifications for details. The Trim registers are located at addresses 00-0Fh. The User area is located at 10h-67h. The Manufacturer area is located at 68h-90h. Compare/Read operations are disabled for this device. Serialization is not supported for this device. When loading .hex data pattern, select Load File As 'Straight.' Device operation does not Program or Verify the device's trim.
= Supported
= This is a replacement daughter card that requires a base socket module
Automated Production Programmers

Programmer Model:38004800
Algorithm Code Revision:1.01.0
QFN Socket Modules
Manual Production Programmers

Programmer Model:2800
Algorithm Code Revision:1.0
QFN Socket Modules
Copyright © 2021, BPM Microsystems

Last Updated: 01/14/2021