Device Support Summary For "Lattice LC4256V-100TQFP (Custom SVF)" |
|
|
Generated by: | BPWin V8.0.1 DeviceSupportUpdate.29 (3/27/2024) |
|
|
Device Parameters |
|
Manufacturer: | Lattice (ID=1181h) | Part Number: | LC4256V-100TQFP (Custom SVF) (ID=5043h) | 8-bit Bytes: | 262144 | Memory Regions: | 0h-3 FFFFh | Vcc(program): | 3.3 | Electrical Erase: | Yes | Set programming: | Yes | Packages: | QFP(100) |
|
|
Note |
|
IMPORTANT:
The Data Pattern enables Verify. Therefore, Verify after programming is a redundant operation since Program also performs Verify.
It is recommended to deselect Verify under Program Tab to achieve maximum job efficiency.
This custom device selection only allows programming the device using the P7001068_EPV.SVF file.
Programming with any other svf file will result in a programming failure.
Serialization is not supported for this device.
|
|
|
= Supported |
|
|
† = This is a replacement daughter card that requires a base socket module |
|
|
Automated Production Programmers |
|
|
|
Manual Production Programmers |
|
|
|
Engineering Programmers |
|
|
|
Copyright © 2024, BPM Microsystems |
|
|