Device Support Summary For "Cypress CY8C29466-PVXI" |
|
|
Generated by: | BPWin V8.0.1 DeviceSupportUpdate.29 (3/27/2024) |
|
|
Device Parameters |
|
Manufacturer: | Cypress (ID=34h) | Part Number: | CY8C29466-PVXI (ID=2Ah) | 8-bit Bytes: | 2097154 | Memory Regions: | 0h-1FFFh; 2000h-3FFFh; 4000h-5FFFh; 6000h-7FFFh; 20 0000h-20 0001h | Vcc(program): | 5.0 | Secure: | Yes | Set programming: | Yes | Packages: | SSOP(28) |
|
|
Note |
|
IMPORTANT:
Please set "Default buffer value" to 0 before loading data file.
Data files generated by Cypress design tools will contain special data records
starting at both address 100000h and address 200000h.
Those data records will be loaded into the Buffer, too.
Therefore, Buffer size is shown bigger than device size.
In order to successfully secure a device, the data file loaded into Buffer
must contain correct security data record.
A secured block and its security bits will read back all 0's
during Read command. If you read a golden part into the buffer, then
program other devices, please note that the default security data
is 0 and you must set proper security data if you want to secure the device.
Gang Serialization is currently not supported. |
|
|
= Supported |
|
|
† = This is a replacement daughter card that requires a base socket module |
|
|
Automated Production Programmers |
|
|
|
Manual Production Programmers |
|
|
|
Engineering Programmers |
|
|
|
Copyright © 2024, BPM Microsystems |
|
|