Device Support Summary For "Cypress S25FL128SDPNFA010 (WX4ASM08MLPA)" |
|
|
Generated by: | BPWin V8.0.1 DeviceSupportUpdate.29 (3/27/2024) |
|
|
Device Parameters |
|
Manufacturer: | Cypress (ID=1h) | Part Number: | S25FL128SDPNFA010 (WX4ASM08MLPA) (ID=17h) | 8-bit Bytes: | 16778248 | Memory Regions: | 0h-FF FFFFh; 100 0010h-100 03FFh; 100 0400h-100 0407h | Vcc(program): | 3.6 | Electrical Erase: | Yes | Set programming: | Yes | Packages: | WSON(8) |
|
|
Note |
|
IMPORTANT:
Device Type: | Flash Memory |
Device Size: | 128 Mbit |
Algorithm Programming Method: | Standard SPI mode |
Memory Organization:
Memory Type |
Attributes(*) |
Included in default Range (Y/N) |
DUT Physical Byte Address(hex) (if this area is selected/Activated) |
BPWin Buffer Byte Address(hex) |
[Main Memory] |
[R/W/E] |
[Yes] |
[0000000h-0FFFFFFh] |
[0000000h-0FFFFFFh] |
[Password] |
[R/W] |
[No] |
[0000000h-0000007h] |
[1000400h-1000407h] |
[OTP] |
[R/W] |
[No] |
[0000000h-00003FFh] |
[1000000h-10003FFh] |
* R:Read only, W: One time programmable (OTP), R/W: readable and one time programmable (OTP), R/W/E: readable and rewritable if not locked.Any configurations listed under "Device-Specific" in the menu item Device-> Settings will be written to the DUT during "Program" operation regardless of memory range selection.
|
1. | Serialization Supported: | Yes |
2. | [Secure/Lock Erasable]: | No |
3. | [Special file format required]: | No |
4. | The device lock bits may be programmed under Device Config > Configure. Each Group is devided into 256K Bytes of data. Boot sectors may only be locked in groups of 256K Bytes; |
|