Device Support Summary For "Cypress S99FL256SDSMFBG01 [Support pending samples]" |
|
|
Generated by: | BPWin V8.0.1 DeviceSupportUpdate.29 (3/27/2024) |
|
|
Device Parameters |
|
Manufacturer: | Cypress (ID=1h) | Part Number: | S99FL256SDSMFBG01 (ID=18h) | 8-bit Bytes: | 33555464 | Memory Regions: | 0h-1 FFFFh; 2 0000h-1FF FFFFh; 200 0020h-200 03FFh; 200 0400h-200 0407h | Vcc(program): | 3.6 | Electrical Erase: | Yes | Set programming: | Yes | Packages: | SOIC(16) |
|
|
Note |
|
IMPORTANT:
Algorithm support for this device selection is developed. Device samples are needed for QA testing and full release in BPWin.
For information on how to obtain an expedited release of this device support, please contact BPM Microsystems at:
Inside Sales
713--688-4600
inside_sales@bpmmicro.com
Information on expected socket module support can be found our web page at: http://www.bpmmicro.com/find-your-device/
**Please note that receipt of device samples and QA testing must be completed before socket module support can be validated.
Device Type: | SPI Flash Memory |
Device Size: | 256 Mbit |
Algorithm Programming Method: | SPI |
Memory Organization:
Memory Type |
Attributes(*) |
Included in default Range (Y/N) |
DUT Physical Byte Address(hex) (if this area is selected/Activated) |
BPWin Buffer Byte Address(hex) |
Flash Memory Array |
[R/W/E] |
[Yes] |
[00000000-01FFFFFF] |
[00000000-01FFFFFF] |
Factory programmed Region |
[R] |
[No] |
[02000000-0200000F] |
[02000000-0200000F] |
Locking Bits Region |
[R/W] |
[No] |
[02000010-0200001F] |
[02000010-0200001F] |
OTP |
[R/W] |
[No] |
[02000020-020003FF] |
[02000020-020003FF] |
PASSWORD |
[R/W] |
[No] |
[02000400-02000407] |
[02000400-02000407] |
| | | | |
Default Algorithm Range |
--- |
--- |
00000000-01FFFFFF |
00000000-01FFFFFF |
* R:Read only, W: One time programmable (OTP), R/W: readable and one time programmable (OTP), R/W/E: readable and rewritable if not locked.
|
|