Device Support Summary For "Infineon(Siemens) XMC1302-T038X0200ABXUMA1" |
|
|
Generated by: | BPWin V8.0.1 DeviceSupportUpdate.29 (3/27/2024) |
|
|
Device Parameters |
|
Manufacturer: | Infineon(Siemens) | Part Number: | XMC1302-T038X0200ABXUMA1 | 8-bit Bytes: | 208896 | Memory Regions: | 1000h-3 2FFFh | Vcc(program): | 3.3 | Set programming: | Yes | Packages: | TSOP(38) |
|
|
Note |
|
IMPORTANT:
Device Type: | ARM-based 32-bit MCU with 32 KByte Flash. |
Device Size: | 32K-Byte Flash |
Algorithm Programming Method: | ASC Bootstrap Loader mode(UART). |
Memory Organization:
Memory Type |
Attributes(*) |
Included in default Range (Y/N) |
DUT Physical Byte Address(hex) (if this area is selected/Activated) |
BPWin Buffer Byte Address(hex) |
Main Flash Memory |
R/W/E |
Yes |
1000_1000 - 1003_2FFF |
0000_1000 - 0003_2FFF |
| | | | |
Default Algorithm Range |
--- |
--- |
1000_1000 - 1003_2FFF |
0000_1000 - 0003_2FFF |
* R:Read only, W: One time programmable (OTP), R/W: readable and one time programmable (OTP), R/W/E: readable and rewritable if not locked.
Any configurations listed under "Device-Specific" in the menu item Device-> Settings will be written to the DUT during "Program" operation regardless of memory range selection.
|
Special Device Considerations:
1. | The Boot Mode Index values can be set under Device -> Settings. This value will not be verified by this algorithm.
The device may not be accessible (and hence stand-alone operations may fail) after programming, depending on the values written to the BMI.
2. | Current algorithm does not support stand alone erase.
|
|
|
|
= Supported |
|
|
† = This is a replacement daughter card that requires a base socket module |
|
|
Automated Production Programmers |
|
|
|
Manual Production Programmers |
|
|
|
Copyright © 2024, BPM Microsystems |
|
|