Device Support Summary For "Infineon(Siemens) SAF-XC836-2FRI AB" |
|
|
Generated by: | BPWin V8.0.1 DeviceSupportUpdate.29 (3/27/2024) |
|
|
Device Parameters |
|
Manufacturer: | Infineon(Siemens) | Part Number: | SAF-XC836-2FRI AB | 8-bit Bytes: | 8192 | Memory Regions: | 0h-FFFh; 1000h-1FFFh | Vcc(program): | 5.0 | Electrical Erase: | Yes | Set programming: | Yes | Packages: | TSSOP(28) |
|
|
Note |
|
IMPORTANT:
This algorithm supports devices up to and including step AB.
Microcontroller with 8KBytes Flash Memory.
Flash Bank 0 is mapped to buffer [0000h - 0FFFh] and Flash Bank 1 is mapped to buffer [1000h - 1FFFh].
Boot Mode Index, Peripheral Enable Bit and Clock Mode Selection can be set under Device > Config.
The Device Configure options cannot be Verified.
The programmer can only access devices with UART BSL Boot Mode. |
|
|
= Supported |
|
|
† = This is a replacement daughter card that requires a base socket module |
|
|
Automated Production Programmers |
|
|
|
Manual Production Programmers |
|
|
|
Engineering Programmers |
|
|
|
Copyright © 2024, BPM Microsystems |
|
|