Device Support Summary For "Cypress CY8C4247LQI-BL473"

 
Generated by:BPWin V8.0.1 DeviceSupportUpdate.29 (3/27/2024)
 
Device Parameters

Manufacturer:Cypress
Part Number:CY8C4247LQI-BL473
8-bit Bytes:2422210562
Memory Regions:0h-1 FFFFh; 9030 0000h-9030 0001h; 9040 0000h-9040 003Fh; 9040 0400h-9040 043Fh; 9050 0000h-9050 000Bh; 9060 0000h-9060 0001h
Vcc(program):1.8
Electrical Erase:Yes
Packages:LAP(56)
 
Note

IMPORTANT:
Device Type: Microcontroller ARM Cortex -M0
Device Size: 128KB Flash
Algorithm Programming Method: Serial Wire Debug(SWD).

Memory Organization:
Memory Type

Attributes(*)

Included in default
Range (Y/N)
DUT Physical Byte Address(hex)
(if this area is selected/Activated)
BPWin Buffer Byte Address(hex)
User Flash 128KB. R/W/E Yes 0000 0000 - 0001 FFFF 0000 0000 - 0001 FFFF
Check sum 2Bytes. R Yes 9030 0000 - 9030 0001 9030 0000 - 9030 0001
Flash protection 64 Bytes Macro-0. R/W/E Yes 9040 0000 - 9040 003F 9040 0000 - 9040 003F
Flash protection 64 Bytes Macro-1. R/W/E Yes 9040 0400 - 9040 043F 9040 0400 - 9040 043F
12 Bytes Metadata. R Yes 9050 0000 - 9050 000B 9050 0000 - 9050 000B
1 Byte Chip Level Protection. R/W/E Yes 9060 0000 - 9060 0001 9060 0000 - 9060 0001
Default Algorithm Range --- --- 0000 0000 - 9060 0001 0000 0000 - 9060 0001
* R:Read only, W: One time programmable (OTP), R/W: readable and one time programmable (OTP), R/W/E: readable and rewritable if not locked. Any configurations listed under "Device-Specific" in the menu item Device-> Settings will be written to the DUT during "Program" operation.
Special Device Considerations: The address [0x90600000] contains the 'States of Chip-Level Protection'. * There are four states of Chip Level Protection into which the silicon can be moved:[ VIRGIN(0x00), OPEN(0x01), PROTECTED(0x02), KILL(0x04)]. - VIRGIN(0x00) - This mode is not for custom use. Can not program this value to device. - OPEN(0x01) - In this mode, can access all the needed resources, including Erase, program and verify flash. - PROTECTED(0x02) - In this mode, access to Flash is disabled. Still allow to Erase and reprogram flash. Can not read and verify flash. - KILL(0x04) - The device can no longer be updated. The address [0x90600001] is ignored. This algorithm does not support Serialization.
 
= Supported
 
= This is a replacement daughter card that requires a base socket module
 
Automated Production Programmers

Programmer Model:39004900
Algorithm Code Revision:1.11.1
 
LAP Socket Modules
FVE4ASMR56QFNJ
 
Manual Production Programmers

Programmer Model:19002900
Algorithm Code Revision:1.11.1
 
LAP Socket Modules
FVE4ASMR56QFNJ
 
Copyright © 2024, BPM Microsystems
 

Last Updated: 01/14/2021