Device Support Summary For "Cypress S34ML08G101BHV00"

 
Generated by:BPWin V8.0.1 DeviceSupportUpdate.29 (3/27/2024)
 
Device Parameters

Manufacturer:Cypress (ID=1D3h)
Part Number:S34ML08G101BHV00 (ID=D195h)
8-bit Bytes:1107296256
Memory Regions:0h-41FF FFFFh
Vcc(program):3.3
Electrical Erase:Yes
Packages:BGA(63)
 
Note

IMPORTANT:
Device Type: Serial NAND Flash Memory
Device Size: 8Gbit
Algorithm Programming Method: Parallel

Memory Organization:
Memory Type

Attributes(*)

Included in default
Range (Y/N)
DUT Physical Byte Address(hex)
(if this area is selected/Activated)
BPWin Buffer Byte Address(hex)
Main memorey R/W/E Yes 000_0000 - 41FF_FFFF 000_0000 - 41FF_FFFF
Default Algorithm Range R/W/E --- 000_0000 - 41FF_FFFF 000_0000 - 41FF_FFFF
* R:Read only, W: One time programmable (OTP), R/W: readable and one time programmable (OTP), R/W/E: readable and rewritable if not locked. Any configurations listed under "Device-Specific" in the menu item Device-> Settings will be written to the DUT during "Program" operation regardless of memory range selection.
Special Device Considerations:
Option Description Default Supported (Y/N)?
Enable ECC If set to Enable, the internal ECC will be enabled. Enabled Yes
1. Serialization Supported: Yes
2. Total number of blocks: 8192
2. Minimun number of good blocks: 8034
3. Pages per block: 64
4. Page size: 2KBytes
5. Spare area size: 64Bytes
6. Bad block markers location: byte 2048 of the first, Second and Third page of each block
7. Default bit error rate tolerance: 1bits per page
 
= Supported
 
= This is a replacement daughter card that requires a base socket module
 
Automated Production Programmers

Programmer Model:380048003000FS-MK23000FS
Algorithm Code Revision:1.11.11.11.1
 
BGA Socket Modules
FVE4ASMC63BGPE
 
Manual Production Programmers

Programmer Model:28002800F-MK22800F
Algorithm Code Revision:1.11.11.1
 
BGA Socket Modules
FVE4ASMC63BGPE
 
Copyright © 2024, BPM Microsystems
 

Last Updated: 01/14/2021