Device Support Summary For "Cypress S25HL512TDPBHI010"

 
Generated by:BPWin V8.0.1 DeviceSupportUpdate.29 (3/27/2024)
 
Device Parameters

Manufacturer:Cypress (ID=34h)
Part Number:S25HL512TDPBHI010 (ID=2A1Ah)
8-bit Bytes:67108864
Memory Regions:0h-3FF FFFFh
Vcc(program):3.6
Electrical Erase:Yes
Set programming:Yes
Packages:BGA(24)
 
Note

IMPORTANT:
Device Type: Serial Flash
Device Size: 512M-bit
Algorithm Programming Mode: SPI

Memory Organization:
Memory Type

Attributes(*)

Included in default
Range (Y/N)
DUT Physical Byte Address(hex)
(if this area is selected/Activated)
BPWin Buffer Byte Address(hex)
Semper Flash Memory Array R/W/E Yes 00000000 - 03FFFFFF 00000000 - 03FFFFFF
Default Algorithm Range --- --- 00000000 - 03FFFFFF 00000000 - 03FFFFFF
* R:Read only, W: One time programmable (OTP), R/W: readable and one time programmable (OTP), R/W/E: readable and rewritable if not locked. Any configurations listed under "Device-Specific" in the menu item Device-> Settings will be written to the DUT during "Program" operation regardless of memory range selection.

Special Device Considerations:
This algorithm uses 256Kb Uniform Sectors and not the default Hybrid Sectors. The status register bits can be set under Device Config > Configure . Erase must be selected if device to be programmed already has QE bit enabled. This algorithm does not support the Secure Silicon Array.
 
= Supported
 
= This is a replacement daughter card that requires a base socket module
 Automated Production Programmers
Programmer Model:380048003000FS-MK23000FS
Algorithm Code Revision:1.01.01.01.0
 
BGA Socket Modules (Sorted by Performance)
FVE4ASMC24BGJ
FVE4ASMC24BGT
FVE4ASMR24BGZ
FVE4ASM24BGB
 Manual Production Programmers
Programmer Model:28002800F-MK22800F
Algorithm Code Revision:1.01.01.0
 
BGA Socket Modules (Sorted by Performance)
FVE4ASMC24BGJ
FVE4ASMC24BGT
FVE4ASMR24BGZ
FVE4ASM24BGB
 
Copyright © 2024, BPM Microsystems
 
Last Updated: 01/14/2021