Device Support Summary For "Cypress S25FL256LAGNHM011" |
|
|
Generated by: | BPWin V8.0.1 DeviceSupportUpdate.29 (3/27/2024) |
|
|
Device Parameters |
|
Manufacturer: | Cypress (ID=60h) | Part Number: | S25FL256LAGNHM011 (ID=19h) | 8-bit Bytes: | 33555456 | Memory Regions: | 0h-1FF FFFFh; 200 0000h-200 00FFh; 200 0100h-200 01FFh; 200 0200h-200 02FFh; 200 0300h-200 03FFh | Vcc(program): | 3.3 | Electrical Erase: | Yes | Set programming: | Yes | Packages: | WSON(8) |
|
|
Note |
|
IMPORTANT:
Device Type: | Serial NOR Flash |
Device Size: | 256M-bit + Four 256-Byte Security Registers |
Memory Organization:
Memory Type |
Attributes(*) |
Included in default range (Y/N) |
DUT Physical Byte Address (hex) (if this area is selected/activated) |
BPWin Buffer Byte Address (hex) |
Main Flash Area |
R/W/E |
Yes |
0000_0000 - 01FF_FFFF |
0000_0000 - 01FF_FFFF |
Security Register 0 |
R/W/E |
No |
0200_0000 - 0200_00FF |
0200_0000 - 0200_00FF |
Security Register 1 |
R/W/E |
No |
0200_0100 - 0200_01FF |
0200_0100 - 0200_01FF |
Security Register 2 |
R/W/E |
No |
0200_0200 - 0200_02FF |
0200_0200 - 0200_02FF |
Security Register 3 |
R/W/E |
No |
0200_0300 - 0200_03FF |
0200_0300 - 0200_03FF |
| | | | |
Default Algorithm Range |
--- |
--- |
0000_0000 - 01FF_FFFF |
0000_0000 - 01FF_FFFF |
* R:Read only, W:One time programmable (OTP), R/W:readable and one time programmable (OTP), R/W/E:readable and rewritable if not locked.
Any configurations listed under "Device-Specific" in the menu item Device-> Settings will be written to the DUT during "Program" operation regardless of memory range selection.
Special Device Considerations: |
|
The Status and Configuration and Register bits can be set under Device -> Configure.
Programming the QPI bit will make the device inaccessible using this algorithm until the Erase operation is performed.
| |