Device Support Summary For "Cypress CYPD2122-24LQXIT" |
|
|
Generated by: | BPWin V8.0.1 DeviceSupportUpdate.29 (3/27/2024) |
|
|
Device Parameters |
|
Manufacturer: | Cypress | Part Number: | CYPD2122-24LQXIT | 8-bit Bytes: | 2422210562 | Memory Regions: | 0h-7FFFh; 9030 0000h-9030 0001h; 9040 0000h-9040 001Fh; 9050 0000h-9050 000Bh; 9060 0000h-9060 0001h | Vcc(program): | 2.7 | Electrical Erase: | Yes | Set programming: | Yes | Packages: | LAP(24) |
|
|
Note |
|
IMPORTANT:
The data pattern is organized in below order:
1) User Flash 32KB: [0x0000-0x7FFF].
2) User Check sum 2bytes: [0x90300000-0x90300001]. This feature is for read only.
3) Flash protection 32 Bytes: [0x90400000-0x9040001F].
4) Device Silicon ID: [0x90500000-0x9050000B]. This feature is for read only for the addresses [0x90500002,0x90500003 and 0x90500005]
5) Chip Level Protection 1 byte: [0x90600000]:
* There are four states of Chip Level Protection into which the silicon can be moved:[ VIRGIN(0x00), OPEN(0x01), PROTECTED(0x02), KILL(0x04)].
- VIRGIN(0x00) - This mode is not for custom use. Can not program this value to device.
- OPEN(0x01) - In this mode, can access all the needed resources, including Erase, program and verify flash.
- PROTECTED(0x02) - In this mode, access to Flash is disabled. Still allow to Erase and reprogram flash.
- KILL(0x04) - The device can no longer be updated.
6) The address [0x90600001] is ignored. |
|
|
= Supported |
|
|
† = This is a replacement daughter card that requires a base socket module |
|
|
Automated Production Programmers |
|
|
|
Manual Production Programmers |
|
|
|
Copyright © 2024, BPM Microsystems |
|
|