Device Support Summary For "Infineon(Siemens) SAF-XC886CM-8FFI(D-Flash: A000-BFFF)" |
|
|
Generated by: | BPWin V8.0.1 DeviceSupportUpdate.29 (3/27/2024) |
|
|
Device Parameters |
|
Manufacturer: | Infineon(Siemens) | Part Number: | SAF-XC886CM-8FFI(D-Flash: A000-BFFF) | 8-bit Bytes: | 49152 | Memory Regions: | 0h-5FFFh; A000h-BFFFh | Vcc(program): | 5.0 | Electrical Erase: | Yes | Packages: | TQFP(48) |
|
|
Note |
|
IMPORTANT:
This algorithm supports devices up to and including step AD.
Microcontroller with (24KBytes + 8KBytes) Flash Memory.
P-Flash is mapped to buffer address [00000h - 05FFFh] and D-Flash is mapped to buffer address [0A000h - 0BFFFh].
D-Flash Bank0 is mapped to A000h-AFFFh and D-Flash Bank1 is mapped to B000h-BFFFh.
The password used to protect the flash area can be set and enabled under Device Config.
Only Erase will erase the device and the password if the correct password is entered under Device Config.
The last 4 bits of the password must be a non-zero value. |
|
|
= Supported |
|
|
† = This is a replacement daughter card that requires a base socket module |
|
|
Automated Production Programmers |
|
|
|
Manual Production Programmers |
|
|
|
Engineering Programmers |
|
|
|
Copyright © 2024, BPM Microsystems |
|
|