Device Support Summary For "Infineon(Siemens) ICL8105G/CM01(Custom02)" |
|
|
Generated by: | BPWin V8.0.1 DeviceSupportUpdate.20 (3/12/2024) |
|
|
Device Parameters |
|
Manufacturer: | Infineon(Siemens) | Part Number: | ICL8105G/CM01(Custom02) | 8-bit Bytes: | 3276 | Memory Regions: | 0h-CCBh | Vcc(program): | 7.8 | Set programming: | Yes | Packages: | SOIC(8) |
|
|
Note |
|
IMPORTANT:
This is a custom algorithm.
This algorithm is to be used for parameterized devices only using an Intended Parameters file.
The data file contains all intended patches to be appended (burnt) to the chip's patchtable, provided that there is enough space in the patchtable to also accommodate the new patches.
The data file must be in ahex-Format, each line consists of an address-data pair and is terminated with CR(0Dh) and LF (0Ah): address-word(hex):data-word(hex)CRLF
The address part consists of six hex-digits while the data part uses four hex-digits only.
Here is an example:
008106:CF97
008107:CF98
008108:CF99
The above example shows a data file containing three patches. It defines to patch
Address 8107h to the new value CF97h
Address 8108h to the new value CF98h
Address 8107h to the new value CF98h
The device can be "frozen" at the end of the parameterization by choosing "YES" for "Freeze Chip after program" under Device->Settings.
Please note that the device will not accessible by this algorithm after being frozen. |
|
|
= Supported |
|
|
† = This is a replacement daughter card that requires a base socket module |
|
|
Automated Production Programmers |
|
|
|
Manual Production Programmers |
|
|
|
Engineering Programmers |
|
|
|
Copyright © 2024, BPM Microsystems |
|
|