Device Support Summary For "Cypress S25FL128SAGNFA000"

 
Generated by:BPWin V8.0.1 DeviceSupportUpdate.29 (3/27/2024)
 
Device Parameters

Manufacturer:Cypress (ID=1h)
Part Number:S25FL128SAGNFA000 (ID=17h)
8-bit Bytes:16778248
Memory Regions:0h-1 FFFFh; 2 0000h-FD FFFFh; FE 0000h-FF FFFFh; 100 0010h-100 03FFh; 100 0400h-100 0407h
Vcc(program):3.6
Electrical Erase:Yes
Set programming:Yes
Packages:SON(8)
 
Note

IMPORTANT: 128M-bit Serial Flash. This algorithm uses Standard SPI mode to Program and Verify/Read the device. The status register bits can be set under Device Config > Configure . Erase must be selected if device to be programmed already has QE bit enabled. The TBPARM OTP bit will be programmed first. You may not mix a top boot device with a bottom boot device. The default Device Range is set to [0000000h-0FFFFFFh]. Please modify the range under Device Config > Range if any of the Security Registers need to be included. The correct password value, located in the range [1000400h-1000407h], may be read only after it is programmed and before the Password Mode has been selected by programming the Password Protection Mode bit to 0 in the ASP Register (ASP[2]). The OTP region is located in the range [1000000h-10003FFh]. The Factory Programmed 128-bit random number located at the beginning of the OTP region cannot be programmed, and data in this region will not be shown in the Buffer Editor. OTP Lock bits are located in the Buffer location [1000010h-1000013h] and Reserved bits are located at [1000014h-100001Fh]. The device lock bits may be programmed under Device Congig > Configure. Each Group is devided into 64K Bytes of data. Boot sectors may only be locked in groups of 64K Bytes; thus, these sectors will make up 2 bits in a group (First two bits for bottom boot devices and Last two bits for top boot devices.)
 
= Supported
 
= This is a replacement daughter card that requires a base socket module
 
Automated Production Programmers

Programmer Model:39004900380048003000FS-MK23000FS3710-MK2471036104610
Algorithm Code Revision:1.51.51.51.51.51.51.31.31.31.3
 
WSON Socket Modules (Sorted by Performance)
FVE4ASML08MXQ     
FVE4ASML08MXP     
FVE4ASMC08MLPT     
FVE4ASM08MLPA     
FX4ASM08MLPA         
ASM08MLPA       
WX4ASM08MLPA             
 
Manual Production Programmers

Programmer Model:1900290028002800F-MK22800F27102710M2610
Algorithm Code Revision:1.51.51.51.51.51.31.31.3
 
WSON Socket Modules (Sorted by Performance)
FVE4ASML08MXQ    
FVE4ASML08MXP    
FVE4ASMC08MLPT    
FVE4ASM08MLPA    
FX4SM08MLPA       
SM08MLPA      
FX4ASM08MLPA       
ASM08MLPA      
WX4ASM08MLPA           
 
Engineering Programmers

Programmer Model:1710161014101410/84
Algorithm Code Revision:1.31.31.31.3
 
WSON Socket Modules (Sorted by Performance)
FX4SM08MLPA    
SM08MLPA
FX4ASM08MLPA    
ASM08MLPA
WX4ASM08MLPA      
 
Copyright © 2024, BPM Microsystems
 

Last Updated: 01/14/2021