Device Support Summary For "Cypress S29AS016J70BHI040 [Support pending samples]" |
|
|
Generated by: | BPWin V8.0.1 DeviceSupportUpdate.29 (3/27/2024) |
|
|
Device Parameters |
|
Manufacturer: | Cypress (ID=1h) | Part Number: | S29AS016J70BHI040 (ID=2203h) | 16-bit words: | 1048704 | Memory Regions: | 0h-7FFFh; 8000h-F FFFFh; 10 0000h-10 007Fh | Vcc(program): | 1.8 | Electrical Erase: | Yes | Set programming: | Yes | Packages: | WFBGA(48) |
|
|
Note |
|
IMPORTANT:
Algorithm support for this device selection is developed. Device samples are needed for QA testing and full release in BPWin.
For information on how to obtain an expedited release of this device support, please contact BPM Microsystems at:
Inside Sales
713--688-4600
inside_sales@bpmmicro.com
Information on expected socket module support can be found our web page at: http://www.bpmmicro.com/find-your-device/
**Please note that receipt of device samples and QA testing must be completed before socket module support can be validated.
Device Type: | Flash Memory |
Device Size: | 16 Mbit |
Algorithm Programming method: | Parallel |
Memory Organization:
Memory Type |
Attributes(*) |
Included in default Range (Y/N) |
DUT Physical Word Address(hex) (if this area is selected/Activated) |
BPWin Buffer Word Address(hex) |
Main Flash Area |
R/W/E |
Yes |
0000 0000 - 000F FFFF |
0000 0000 - 000F FFFF |
SecSi sector |
R/W |
N0 |
10 0000 - 0010 007F |
10 0000 - 0010 007F |
| | | | |
Default Algorithm Range |
--- |
--- |
0000 0000 - 000F FFFF |
0000 0000 - 000F FFFF |
* R:Read only, W:One time programmable (OTP), R/W:readable and one time programmable (OTP), R/W/E:readable and rewritable if not locked.
Any configurations listed under "Device-Specific" in the menu item Device-> Settings will be written to the DUT during "Program" operation regardless of memory range selection.
Special Device Considerations: |
|
The SecSi sector can be purchased programmed and locked from the factory.
If this is the case, this sector needs to be excluded from programming and verification ranges as this data could have a unique number.
The configuration option for the factory lock is used to indicate the status of the chip.
If this option is different than the state of the chip during verification or compare, it will cause an error.
If the part has not been locked by the factory, the user can treat this sector as an additional memory sector with OTP sector protection. | |
|
= Supported |
|
|
† = This is a replacement daughter card that requires a base socket module |
|
|
Automated Production Programmers |
|
|
|
Manual Production Programmers |
|
|
|
Copyright © 2024, BPM Microsystems |
|
|