Device Support Summary For "Infineon(Siemens) XMC4700-F144K2048"

 
Generated by:BPWin V8.0.1 DeviceSupportUpdate.29 (3/27/2024)
 
Device Parameters

Manufacturer:Infineon(Siemens)
Part Number:XMC4700-F144K2048
8-bit Bytes:203426816
Memory Regions:C00 0000h-C1F FFFFh; C20 0000h-C20 0BFFh
Vcc(program):3.3
Electrical Erase:Yes
Set programming:Yes
Packages:LQFP(144)
 
Note

IMPORTANT:
Device Type: XMC4700 ARM Cortex-M4 CPU core Microcontroller
Device Size: 2MB Code Flash + 3kB User Configuration Blocks
Algorithm Programming Method: Serial Wire Debug interface.

Memory Organization:
Memory Type

Attributes(*)

Included in default
Range (Y/N)
DUT Physical Byte Address (hex)
(if this area is selected/Activated)
BPWin Buffer Byte
Address (hex)
Flash Bank R/W/E Yes 0C00_0000 - 0C1F_FFFF 0C00_0000 - 0C1F_FFFF
User Configuration Blocks (Offset) W/E No 0C00_0000 - 0C00_0BFF 0C20_0000 - 0C20_0BFF
Default Algorithm Range --- --- 0C00_0000 - 0C1F_FFFF 0C00_0000 - 0C1F_FFFF
*R:Read only, W: One time programmable (OTP), R/W: readable and one time programmable (OTP), R/W/E: readable and rewritable if not locked. Any configurations listed under "Device-Specific" in the menu item Device-> Settings will be written to the DUT during "Program" operation regardless of memory range selection. Special Device Considerations:
1. Please set Data Pattern Default Value as '0'.
2. To program User Configuration Blocks include the designated range in the device options.
3. To erase PROCON bits, select entire device range, and user needs to enable password protection flag in the configuration options.
4. UCB range includes BMI, Password, Confirmation code, and Protection Configuration registers.
5. The confirmation code 8AFE15C3H should be programmed for the UCB content to be ôconfirmedö otherwise it is ôunconfirmedö.
6. These values will not be verified by this algorithm. UCB range cannot be read back, to protect sensitive data.
7. Once the BMI or passwords are programmed the device may be locked.
8. Device specifications provide details on UCB content. See user's Manual for more information.
 
= Supported
 
= This is a replacement daughter card that requires a base socket module
 
Automated Production Programmers

Programmer Model:3900490038004800
Algorithm Code Revision:1.01.01.01.0
 
LQFP Socket Modules
FVE2ASMR144LFQF
 
Manual Production Programmers

Programmer Model:190029002800
Algorithm Code Revision:1.01.01.0
 
LQFP Socket Modules
FVE2ASMR144LFQF
 
Copyright © 2024, BPM Microsystems
 

Last Updated: 01/14/2021