Device Support Summary For "Infineon(Siemens) SAK-XC164CS16F40FBBFXQMA1"

 
Generated by:BPWin V7.0.7 DeviceSupportUpdate.60 (11/3/2021)
 
Device Parameters

Manufacturer:Infineon(Siemens) (ID=41h)
Part Number:SAK-XC164CS16F40FBBFXQMA1 (ID=BCh)
16-bit words:6356992
Memory Regions:60 0000h-60 FFFFh
Vcc(program):2.5
Electrical Erase:Yes
Secure:Yes
Set programming:Yes
Packages:PG-TQFP(100)
 
Note

IMPORTANT:
Device Type: Microcontroller with Flash Memory
Device Size: 128KByte Flash Memory
Algorithm Programming method: JTAG

Memory Organization:
Memory Type

Attributes(*)

Included in default
Range (Y/N)
DUT Physical Byte Address(hex)
(if this area is selected/Activated)
BPWin Buffer Byte Address(hex)
Flash Memory R/W/E Yes 00C0_0000 - 00C1_FFFF 00C0_0000 - 00C1_FFFF
Default Algorithm Range --- --- 00C0_0000 - 00C1_FFFF 00C0_0000 - 00C1_FFFF
* R:Read only, W:One time programmable (OTP), R/W:readable and one time programmable (OTP), R/W/E:readable and rewritable if not locked. Any configurations listed under "Device-Specific" in the menu item Device-> Settings will be written to the DUT during "Program" operation regardless of memory range selection.
Special Device Considerations:
Make sure that the default buffer value is set to 00h before loading data patterns.
The read, write protection and passwords are described under Device Configure.
It is programmed with the Secure command.
To program the Device Configure options, you must select the appropriate options in that menu, and set "Secure after programming" to 'ENABLE'.
Otherwise none of the options will be programmed with the Program command.
If a device was previously programmed with a set of passwords with read protection enabled, the device can NOT be accessed any more.
If a device was previously programmed with a set of passwords with only write protection enabled,
a stand alone Erase operation must be executed first with correct passwords before attempting to reprogram it with a new set of passwords.
Serialization not available.
 
= Supported
 
= This is a replacement daughter card that requires a base socket module
 
Automated Production Programmers

Programmer Model:39004900
Algorithm Code Revision:1.01.0
 
PG-TQFP Socket Modules (Sorted by Performance)
FX4ASMR100QFPCE   
ASMR100QFPCE   
LX4ASMR100QFPCE
 
Manual Production Programmers

Programmer Model:19002900
Algorithm Code Revision:1.01.0
 
PG-TQFP Socket Modules (Sorted by Performance)
FX4ASMR100QFPCE   
ASMR100QFPCE   
LX4ASMR100QFPCE
 
Copyright © 2021, BPM Microsystems
 

Last Updated: 01/14/2021