Device Support Summary For "Infineon(Siemens) SAK-TC233LP-32F200N (DAP)"

 
Generated by:BPWin V7.0.7 DeviceSupportUpdate.72 (11/30/2021)
 
Device Parameters

Manufacturer:Infineon(Siemens)
Part Number:SAK-TC233LP-32F200N (DAP)
8-bit Bytes:2937068544
Memory Regions:A000 0000h-A01F FFFFh; AF00 0000h-AF01 FFFFh; AF10 0000h-AF10 1BFFh
Vcc(program):1.3
Electrical Erase:Yes
Packages:PG-TQFP(100)
 
Note

IMPORTANT:
Device Type: AURIX 32-Bit Single-Chip Microcontroller
Device Size: 2 MByte PFlash Memory + 128 Kbytes DFlash Memory
Algorithm Programming Method: DAP

Memory Organization:
Memory Type

Attributes(*)

Included in default
Range (Y/N)
DUT Physical Byte Address(hex)
(if this area is selected/Activated)
BPWin Buffer Byte Address(hex)
PFlash0 (Non-Cached) R/W/E Yes A000_0000 - A01F_FFFF A000_0000 - A01F_FFFF
DFlash0 DF_EEPROM R/W/E Yes AF00_0000 - AF01_FFFF AF00_0000 - AF01_FFFF
DFlash0 DF_UCB R/W/E No AF10_0000 - AF10_1BFF AF10_0000 - AF10_1BFF
Default Algorithm Range --- --- A000_0000 - AF01_FFFF A000_0000 - AF01_FFFF
* R:Read only, W: One time programmable (OTP), R/W: readable and one time programmable (OTP), R/W/E: readable and rewritable if not locked. Any configurations listed under "Device-Specific" in the menu item Device-> Settings will be written to the DUT during "Program" operation regardless of memory range selection.
Special Device Considerations:
1. This algorithm only supports UCB0-UCB6.
UCB4 is factory set and is not programmable.
2. UCBs that are blank in the data buffer will be skipped during Program and Verify operations.
UCBs with data must also have valid confirmation values.
Programming a UCB without valid confirmation values may make the device non-functional.
3. If the UCB range is included during the Erase operation,
the algorithm will attempt to erase each supported UCB and program the default confirmation values.
4. When reading a blank logical sector, there may be bit errors due to unprogrammed ECC.
 
= Supported
 
= This is a replacement daughter card that requires a base socket module
 
Automated Production Programmers

Programmer Model:39004900
Algorithm Code Revision:1.01.0
 
PG-TQFP Socket Modules (Sorted by Performance)
FX4ASM100TQFPK   
ASM100TQFPK   
LX4ASM100TQFPK
 
Manual Production Programmers

Programmer Model:19002900
Algorithm Code Revision:1.01.0
 
PG-TQFP Socket Modules (Sorted by Performance)
FX4ASM100TQFPK   
ASM100TQFPK   
LX4ASM100TQFPK
 
Copyright © 2021, BPM Microsystems
 

Last Updated: 01/14/2021