Device Support Summary For "Cypress S34ML08G101BHA00" |
|
|
Generated by: | BPWin V8.0.1 DeviceSupportUpdate.29 (3/27/2024) |
|
|
Device Parameters |
|
Manufacturer: | Cypress (ID=1D3h) | Part Number: | S34ML08G101BHA00 (ID=D195h) | 8-bit Bytes: | 1107296256 | Memory Regions: | 0h-41FF FFFFh | Vcc(program): | 3.3 | Electrical Erase: | Yes | Packages: | BGA(63) |
|
|
Note |
|
IMPORTANT:
Device Type: | Serial NAND Flash Memory |
Device Size: | 8Gbit |
Algorithm Programming Method: | Parallel |
Memory Organization:
Memory Type |
Attributes(*) |
Included in default Range (Y/N) |
DUT Physical Byte Address(hex) (if this area is selected/Activated) |
BPWin Buffer Byte Address(hex) |
Main memorey |
R/W/E |
Yes |
000_0000 - 41FF_FFFF |
000_0000 - 41FF_FFFF |
| | | | |
Default Algorithm Range |
R/W/E |
--- |
000_0000 - 41FF_FFFF |
000_0000 - 41FF_FFFF |
* R:Read only, W: One time programmable (OTP), R/W: readable and one time programmable (OTP), R/W/E: readable and rewritable if not locked.
Any configurations listed under "Device-Specific" in the menu item Device-> Settings will be written to the DUT during "Program" operation regardless of memory range selection.
Special Device Considerations:
Option |
Description |
Default |
Supported (Y/N)? |
Enable ECC |
If set to Enable, the internal ECC will be enabled. |
Enabled |
Yes |
1. | Serialization Supported: | Yes |
2. | Total number of blocks: | 8192 |
2. | Minimun number of good blocks: | 8034 |
3. | Pages per block: | 64 |
4. | Page size: | 2KBytes |
5. | Spare area size: | 64Bytes |
6. | Bad block markers location: | byte 2048 of the first, Second and Third page of each block |
7. | Default bit error rate tolerance: | 1bits per page |
|
|
|
= Supported |
|
|
† = This is a replacement daughter card that requires a base socket module |
|
|
Automated Production Programmers |
|
|
|
Manual Production Programmers |
|
|
|
Copyright © 2024, BPM Microsystems |
|
|