Device Support Summary For "Cypress CY7C66113-56LFC (with adapter) TPA" |
|
|
Generated by: | BPWin V8.0.1 DeviceSupportUpdate.29 (3/27/2024) |
|
|
Device Parameters |
|
Manufacturer: | Cypress (ID=34h) | Part Number: | CY7C66113-56LFC (with adapter) TPA (ID=3Fh) | 8-bit Bytes: | 8192 | Vcc(program): | 6.25 | Vpp(program): | 12.75 | Secure: | Read and Program | Set programming: | Yes | Packages: | LAP(56) |
|
|
Note |
|
IMPORTANT:
This device requires the use of a third party adapter.
Require Cypress adapter CY3083-QFN56 with CY3083-05 matrix card.
Due to the layout of the adapter board, it has to be installed upside down on a DIP sokcet module.
Pin 17(P1B-17) of the adapter must be inserted into the Pin 1 of a 48-DIP socket module.
USB Keyboard Microcontroller with EPROM.
The EPROM locations from 1FE0h to 1FFFh (not included in Verify operation)
can be preset by the factory.
They can not be programmed. Therefore the actual EPROM size is 1FE0h
and the last address is 1FDFh.
Once the security fuse is written, all bytes should read FFh.
DEVICE ID 3Fh means the DEVICE ID read 3Xh. |
|
|
= Supported |
|
|
† = This is a replacement daughter card that requires a base socket module |
|
|
Copyright © 2024, BPM Microsystems |
|
|