Device Support Summary For "3D Plus 3DMR8M08VS8666" |
|
|
Generated by: | BPWin V8.0.1 DeviceSupportUpdate.29 (3/27/2024) |
|
|
Device Parameters |
|
Manufacturer: | 3D Plus | Part Number: | 3DMR8M08VS8666 | 8-bit Bytes: | 1048576 | Memory Regions: | 0h-F FFFFh | Vcc(program): | 3.3 | Packages: | DIP(48) |
|
|
Note |
|
IMPORTANT:
Device Type: | Asynchronous Magnetoresistive RAM (MRAM) |
Device Size: | 8 x 1 Mbit |
Algorithm Programming Method: | Parallel |
Memory Organization:
Memory Type |
Attributes(*) |
Included in default Range (Y/N) |
DUT Physical Byte Address(hex) (if this area is selected/Activated) |
BPWin Buffer Byte Address(hex) |
MRAM |
R/W/E |
Yes |
00000-1FFFF |
00000-FFFFF |
| | | | |
Default Algorithm Range |
--- |
--- |
00000-1FFFF |
00000-FFFFF |
* R:Read only, W: One time programmable (OTP), R/W: readable and one time programmable (OTP), R/W/E: readable and rewritable if not locked.
Any configurations listed under "Device-Specific" in the menu item Device-> Settings will be written to the DUT during "Program" operation regardless of memory range selection. |
|
|
= Supported |
|
|
† = This is a replacement daughter card that requires a base socket module |
|
|
Manual Production Programmers |
|
|
|
Engineering Programmers |
|
|
|
Copyright © 2024, BPM Microsystems |
|
|