Device Support Summary For "Acer Laboratories Inc. M6759" |
|
|
Generated by: | BPWin V8.0.1 DeviceSupportUpdate.29 (3/27/2024) |
|
|
Device Parameters |
|
Manufacturer: | Acer Laboratories Inc. (ID=7FC8h) | Part Number: | M6759 (ID=6759h) | 8-bit Bytes: | 65536 | Vcc(program): | 5.0 | Vpp(program): | 12 | Electrical Erase: | Yes | Secure: | Read and Program | Packages: | PLCC(44) |
|
|
Note |
|
IMPORTANT: Microcontroller with Flash EPROM.
Default buffer value must be set to 255(FFh). The EncryptBuf is used on read back. If the Encryption array
has been programmed, EncryptBuf must contain the correct encryption key to read the device properly. If encryption
is not being used on this device, all 4 bytes in the EncryptBuf must be set to 255(FFh).
You must select the appropriate security mode under DEVICE/OPTIONS to operate the secure command.
Three lock bits are available in this chip: LB1, LB2 and LB3. "Mode2" programs LB1, "Mode3" programs LB1
and LB2, and "Mode4" programs all lock bits.
!!!Note: If both Encryption and Secure functions are required, they must be done together by enabling both the
"Encrypt after programming" and "Secure after programming" options under DEVICE/OPTIONS. |
|
|
= Supported |
|
|
† = This is a replacement daughter card that requires a base socket module |
|
|
Automated Production Programmers |
|
|
|
Manual Production Programmers |
|
|
|
Engineering Programmers |
|
|
|
Copyright © 2024, BPM Microsystems |
|
|